10
Installation Instructions
Measure
If you are replacing your current deadbolt lock, industry standards are 60mm
(2-3/8”) or 70mm
(2-3/4”) backset. To determine which backset length you should use, so measure the distance (x)
between the center of 54mm (2-1/8”) hole to door edge.
Prepare bolt assembly based on the distance (x)
Bolt ships with bolt assembly in 60mm
(2-3/8”) position. If required, twist the bolt and pull to
extend (simultaneously) to 70mm
(2-3/4”) backset position.
Twist upwards
Pull
Twist downwards
to lock backset position
X
54mm
(2-1/8”)
Hole
