background image

17

Troubleshoot

I am unable to close the shackle 

to lock the padlock. 

• Do an unlock via PIN code or Bluetooth and try 

to close the shackle again.

•  Note that you might accidentally lock the 

padlock manually by holding the UNLOCK 

button for 2 seconds when the padlock is open.

• Make sure the Padlock is unlocked before you 

turn the Torx cap, to remove the batter cover.

•  Note that the Torx cap cannot be turned while 

the Padlock is locked.

I am unable to turn the Torx Cap to 

remove the battery cover.

• Keypad Security Lockout is triggered on the 

Padlock. 

• Please refer to page 14.

The padlock keypad flashes white 

and LED indicator flashes red when I 

activate the keypad.

•  

Please ensure terminals of the 9V battery are in 

contact with the Jump Start contact points of the 

Padlock for 2 seconds to activate the padlock.

• The 9V Battery terminals must be in constant 

contact with the padlock 9V contact pins while 

unlocking it with PIN code or Bluetooth.

I tried to use a 9V Battery to 

jumpstart the lock but unable to.

• Do a Bluetooth Unlock or sync and try again.

• Make sure that the generated PIN codes are 

activated within the activation period before it 

expired.

I have generated my PINs from the 

app but it cannot work.

• The Padlock is low in battery.

• Use an Alkaline 9V Battery to jumpstart the 

lock and unlock the Padlock to replace the 

batteries.

•  Refer to page 8 to know how to replace 

batteries. 

I tried to unlock the Padlock but 

the keypad went off and came 

back on with 2 slow and 2 quick 

beeps. 

• The Padlock’s battery is flat. 

•  Use an Alkaline 9V Battery to jumpstart the lock 

and unlock the Padlock to replace the batteries.

•  Refer to page 8 to know how to replace batteries.  

The lock is not responding at all.

• Use the spare QR sticker that is provided in the 

Padlock box.

I can’t scan the QR sticker as it is 

worned out.

• Make sure Auto Relock is ON via the 

igloohome mobile app.

• If Auto Relock is ON and the padlock is 

still not working, try to lock the padlock 

manually by holding the UNLOCK button for 

2 seconds.

I closed the shackle but the padlock 

did not relock automatically.

Summary of Contents for Padlock.



















Reviews: