12
7
Installing the Striker
Position the striker on the door frame such that the bolt tongue can extend smoothly into the striker.
Use provided shim plates if needed. Secure the striker with four screws, if needed, use longer ones
provided.
Screws
ST FH4 X 25 x4
Front View of the Installation
Position: Adjacent to Back Assembly
Screws
ST FH4 X 25 x4
Front View of the Installation
Position: Perpendicular to Back Assembly
(for outswing door)
Note: Backset needs to be > 90mm to
fit striker in perpendicular position.
Bolt Tongue
Striker