19
Managing Access in App
PIN codes can be generated on the app under
[Access]
, create
[+Access]
and choose either
One-Time, Permanent or Duration PIN.
Pin codes will expire if its not use within its activation period. Refer to the table below.
Creating PIN codes
PIN Type
Use PIN within*
One-Time PIN
24 hrs of generation
Permanent PIN
24hrs of generation
Duration PIN
24hrs from the start time
2
Bluetooth Guest Key
Bluetooth Guest Key can be shared with other users for mobile access. It allows your guests
to unlock the igloohome smart lock via Bluetooth.
There are 3 steps to using a Shared Bluetooth Key
1. Under
[Access]
, create
[+Access]
and choose
[Bluetooth Key]
under
[Access Type]
. Proceed to share the key after it is created.
2.
Guest receives the Bluetooth Key by one of these methods:
• Clicking the URL given and follow the instructions.
• Scanning the QR code under
[Visits]
.
3.
Guest can now use the Bluetooth Key under
[Visits]
whenever he is within
range of the lock.
Notes:
•
The owner can revoke the Bluetooth Key in App.
•
Bluetooth Key must be accepted within 1 hour generation before it expires.
4
Resetting PIN codes
Ensure that Bluetooth is switched on, and you are within Bluetooth range of the lock.
Go to Home > Select Lock Name >
[Settings]
> Reset Pins
Lock will reset all codes, except for Master PIN, and all PIN codes previously generated are no
longer valid.
3
Adding Key Card
1. Under
[Access]
, select
[+Access]
followed by
[Key Card Holder]
.
2. Follow instructions on the app and select
[Done]
to complete the process.
Note: Duration PIN code end times can be customised within a 28-day timeframe. Past this
timeframe, the end time will automatically be configured to the start time.
