-2-
www.igmtools.com
Operating instructions EN
Please read this manual thoroughly and follow the safety instructions in it! Technical changes
and printing errors reserved!
Dear customer,
This manual contains important instructions and information for the installation and proper use of
DC30 and DC40 Power feeders.
This manual is a part of the machine and therefore it should not be kept elsewhere than in the vicinity
of the machine so that you can be consulted at any time by you or other persons operating the
machine.
Please read and follow the safety instructions!
C
arefully read these instructions before using the machine. Operation of the machine will
be simpler and you will also lower the risk of injury while eliminating the probability of
incorrect operation and possible damage to the machine.
Because of our policy of constant
improvement, the design, construction or pictures may differ slightly. Should you discover
any mistakes, please contact us at podpora@igm.cz.
1. DECLARATION OF CONFORMITY
The undersigned: IGM nástroje a stroje s.r.o.
Address: Ke Kopanině 560
Tuchoměřice, Praha-západ, PSČ 252 67
Czech Republic, EU
Tel. +420 220 950 910
Certifies
Product:
Power Feeder
Model:
DC30
and
DC40
Manufacturer: CO-MATIC Machinery Co., Ltd.,No.
473-16,
San Feng Road, Houli District, Taichung
City,Taiwan, R.O.C. 42156
We declare under our sole responsibility that the
product described in this manual is in conformity
with the following standards: EN ISO 12100, EN ISO
13857, EN 349, EN 953, EN 60204-1, EN ISO 11202,
TABLE OF CONTENTS
page
1. DECLARATION OF CONFORMITY
2
2. WARRANTY SERVICE
3
3. SAFETY INSTRUCTIONS
3
3.1 Notice
3
3.2 General safety instructions
3
3.3 Risks
4
3.4 Important notice
4
3.5 Safety rules
4
4. SPECIFICATIONS OF THE MACHINE
4
4.1 Machine description
4
4.2 Technical data
4
4.3 The package includes
4
5. TRANSPORT, UNPACKING AND ASSEMBLY
5
5.1 Transport and unpacking
5
5.2 Assembly
5
5.2.1 Fastening to a machine
5
5.2.2. Assembly
5
5.3 Electrical connection
6
6. SET-UP AND ADJUSTMENT
6
6.1 Basic movements of the feeder
6
6.1.1 Feeding from the side
6
6.1.2 Feeding at an angle
6
6.2 Control panel features
7
7. OPERATING THE MACHINE
7
8. MAINTENANCE AND CONTROL
7
8.1 Replacing rollers
7
8.2 Greasing
7
8.3 Transmission fluid replacement
8
9. MALFUNCTION ASSISTANCE
8
9.1 Error messages
8
10. PROTECTION OF THE ENVIRONMENT
8
11. ACCESSORIES (SPARE PARTS)
8
