-
3
-
www.igmtools.com
Operating instructions EN
2. WARRANTY SERVICE
The warranty is subject to Terms and Conditions and
Warranty Conditions of IGM nástroje a stroje s.r.o.,
the current version of which are available at www.
igmtools.com.
3. SAFETY INSTRUCTIONS
3.1 Notice
This machine is designed for work with wood and
wooden materials.
Proper use also includes compliance with the regular
operational and maintenance work described in this
manual.
The machine can be operated only by persons familiar
with the operation procedures, maintenance and are
aware of potential risks.
Comply with the minimum age limits specified by
law. The machine may only be used when in perfect
technical condition.
All safety and protective components must be
installed when operating the machine.
Besides these instructions, also adhere to the safety
instructions of your country and to the generally
recognized technical practices concerning the
operation of woodworking machinery.
The manufacturer or the supplier is not responsible
for any damage resulting from improper use.
Every user is responsible for their own actions.
Warranty cannot be claimed if any of the following
principles are broken:
- Unsuitable work environment: high humidity,
contamination.
- Damage caused by an improper assembly and/or
improper storage.
- Use of damaged machinery.
- Failure to follow the operating instructions:
transport, storage, assembly, putting into operation,
cleaning and maintenance of the machine.
- Use of unauthorized spare parts.
- Unauthorized assembly of the machine.
- Do not use worn out spare parts.
3.2 General safety instructions
The machine can pose danger when improperly
operated.
Thoroughly read the operating instructions and make
sure that you understand everything before doing
anything with the machine.
Keep this user manual clean and protect it from dirt
and moisture; in case of re-selling, pass the manual
onto the new owner.
Any alterations or changes to the machine are
prohibited. Daily try out if the machine runs smoothly
and check the function of protective covers before
operating the machine. Remove any malfunctions or
deficiencies found on the machine as well as
damaged protective cover. The machine may only be
used when in perfect technical condition.
Use a hairnet or a hat to protect long hair. Wear tight-
fitting clothes, remove all bracelets, rings, necklaces
or ties. Wear work shoes only. In any case, do not wear
casual shoes or sandals during work. Abide by the
regulations for personal protection.
Always wear safety eyewear. Always use hearing
protection.
Abide by the „safety“ instructions in this manual.
Make sure you have enough space for your work.
Do not perform any operations that
are not suitable for this machine.
Make sure you have good lighting.
Make sure the power cord is not in your way when
working. Keep your work area clean. Never touch the
machine when it‘s running.
Make sure you are concentrating and paying
attention. Use caution. Never work under the
influence of drugs and/or alcohol.
Make sure there are no children around when
working with the machine. Never leave the machine
unattended. Always switch the machine off when
leaving the workspace.
Do not place anything on the machine.
The repair of electrical components can be only
carried out by a professional. Damaged electric cord
must be replaced immediately.
Before banding, remove nails and any other foreign
objects that could be in the way of your work.
The switch must be in the „OFF“ position before you
connect the machine to the power supply.
Do not use the machine if the ON-OFF switch does
not work correctly.
The use of any other accessories than recommended
by this manual be hazardous.
Make sure the cable is long enough and there is no
excessive tension or bend over the table.
Keep away from flammable or explosive materials.
