-
4
-
www.igmtools.com
Operating instructions EN
3.3 Risks
Even when using the trimmer according to the
manual, there is still some danger.
Danger of a rotating tool. Watch out for cloths or hair
getting stuck.
The tool is sharp, watch out so you do not cut yourself.
Use gloves.
Danger of flying particles. Wear eye protection and a
respirator.
4. TECHNICAL SPECIFICATION
4.1 Machine Description
1 Main Switch
2 Machine Housing
3 Motor
4 Calibration
5 Quick Release
6 Dust Extraction Outlet
7 Safety Cover
8 Router Bit/Cutter
9 Bottom Cover
10 Radius Scraper
fig. 1
4.2 Technical parameters
Power
450W / 230V
Speed
30 000/rpm.
Router Height setting
16mm
Collet
6mm
Weight
2kg
4.3 Supplied with
Edgeband Trimmer
Plastic Case
Wrenches 13 and 22 mm
Collet 6mm
Radius Scraper
Router Bit R2 mm, S6 mm
5.TRANSPORT, UNPACKING AND ASSEMBLY
5.1 Transport and Unpacking
Make sure there is no apparent damage caused by
transport, which could have caused damage to the
machine or your health.
5.2 Assembly (compilation)
The machine is supplied assembled. Should you
discover any defects while unpacking, contact your
supplier and do not use it.
