Using (8) 1/4-20 x 3/4" Bolts & Lock
Nuts, attach the back brace to
each leg assembly. NOTE: Mount
the flat side of brace to back side
of the legs. Do not fully tighten bolts.
STEP 4
1/4-20 x 3/4”
Hex Head Bolt
Nylock Nut
Attach the galvanized adjustable upright
inserts to the leg at desired height.
Use (4) 5/16 x 3/4" Bolts with Lock Nuts
per insert.
STEP 3
**SKIP THIS STEP IF YOU HAVE NOT PURCHASED THE
ADJUSTABLE HEIGHT OPTION**
5/16-18 x 3/4”
Hex Head Bolt
Nylock Nut
ADJUSTABLE HEIGHT
STEP 5
Slide shelf into place between the two
leg assemblies. Two mounting holes on the
ends of the shelf will line up with holes
on the sides of each lower leg brace.
Use (4) 1/4-20 x 3/4" Bolts & Lock
Nuts to attach the shelf to the legs.
LOWER SHELF OPTION
(continue if not purchased)
1/4-20 x 3/4”
Hex Head Bolt
Nylock Nut
