12
A.
Glass front must be removed, and the appliance must be mounted in its final location
before the log / crystal / pebble ember sets are installed.
B.
If your fireplace includes a log set, remove the log set from the package, place it into the
fireplace
’s designated place.
Figure 1.
C.
If your fireplace includes a pebble or crystal media set, please note that the crystal or pebble
media may have a fine oil residue that needs to be cleaned prior to installation. Clean them with
mild dish soap, drain, rinse thoroughly and dry before placing into the tray.
D.
Place the plastic tray (
I
) into the fireplace
’s designated place. Then carefully place crystal or
pebble set into the bottom tray on the front of the appliance as illustrated. Apply an even layer
from side to side.
Figure 2, Figure 3.
Figure 1. Figure 2.
Figure 3.
(Crystal Media)
Figure 3.
(Pebble Media)
