13
Operation
Read and understand
this entire owner’s manual, including
all safety information
,
before
plugging in
or
using
this product. Failure to do so could result in
electric shock,
fire, serious injury, or death.
Power
Make sure the ON/OFF switch, located on the left side panel, is in the OFF position. Plug the power
cord into a 110~120 Volt 15 Amp grounded outlet (see
IMPORTANT SAFETY INFORMATION
on
Pages 2 and 3
). Make sure the outlet is in good condition and that the plug is not loose.
NEVER
exceed the maximum amperage for the circuit.
DO NOT
plug other appliances into the same circuit.
Methods of Operation
This electric fireplace may be operated by the CONTROL PANEL, located on the right-side panel of
the fireplace (see figure below), or by the battery-powered REMOTE CONTROL.
The operation and functions of the two methods are the same.
Before operating, please review the
IMPORTANT SAFETY INFORMATION
on
Pages 2 and 3 and
heed all warnings.
Remote Control &Control Panel Operation
BUTTON
FUNCTION
ACTION & INDICATION
POWER
ON
: Enables control panel functions and
remote control. Turns on flame effect.
OFF
: Disables control panel functions and
remote control. Turns off flame effect.
1.
Press once
. Indicator light turns on.
Power turns on. All functions enabled.
2.
Press again
. Flame effect turns off. Unit
goes to standby. All functions turn off.
TIMER
TIMER button
: Controls timer settings to
turn off fireplace at selected time.
Settings range from 0.5 hours to 7.5 hours.
1.
Press once
. Indicator light turns on.
Timer is set to 0.5 hours.
2.
Press again until desired setting is
reached
. Indicator lights show setting.
Remote control
Control Panel