30
SERVICE SCHEDULE
Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures.
The service schedule is a guide for correct maintenance of the attachment.
Service Schedule
O
Check condition / proper operation. Adjust or
replace as needed.
V
Refill as
needed.
D
Check the display. Service only when
required.
C
Clean.
W
Service every 10 hours when operating in
water.
R
Replace.
F
First time only.
G
Grease.
Item
Service Required
Service Interval (hours and
annually)
10
50
Annually
Hydraulic
Hoses &
Fittings
Check for damage or leaking hydraulic hoses
or fittings. Replace if necessary.
O
Decals
Check for damaged or missing decals.
Replace if necessary.
O
Auger Bits
Check points and teeth. Repair if damaged or
replace if necessary.
O
Drive Unit
Output Shaft
Check for damage. Repair if damaged or
replace if necessary.
O
Planetary
Reduction
Gearbox Oil
(Auger 150 PH
and 210 PH
models only)
Drain and replace oil. Use 21 oz. of EP 80-90
wt. gear oil.
F
R
Motor Drive
Chain (Auger
75 DDH and
165 DDH
models only)
Lubricate. Chain should have approximately
25.4mm (1 in.) of free play.
50 hours or as
needed
Summary of Contents for Auger 75 DDH
