16
Adjusting The Scarifier Teeth
Figure 16
P142022b
1.
Remove the retaining pin (Item 1), locking pin (Item
2), and adjust the scarifier (Item 3) [Figure 16] to the
desired position.
2.
Insert locking pin and retaining pin.
Removing The Three-Point Implement
Figure 17
C138245a
1.
Remove the retainer pin (Item 1) and pin (Item 2)
[Figure 17].
It may be necessary to lengthen or shorten the top
link when remove the implement from the compact
tractor. (See Adjusting The Top Link on Page 13)
2.
Remove the top link (Item 3) [Figure 17] from the
implement.
Figure 18
138244a
3.
Place the top link (Item 1) into the storage position
bracket (Item 2) [Figure 18].
Figure 19
P142005a
4.
Remove the lower implement pin (Item 1) from the
lower mounts and lower link (Item 2) [Figure 19]
5.
Enter the compact tractor.
(See Entering And Exiting The Compact Tractor on
Page 11)
6.
Start the engine and release the parking brake.
