6
FEATURES AND OPERATIONS
3. TURBO TIMER FUNCTION FOR AUTOMATIC
While car is running with the key is in the ignition and after you have gone though the “Exit Sequence”, push the AUX 2
button, then push and hold the Engine Start Button for 2 seconds (Make sure the car is in neutral and do not touch the brake
pedal while performing this step). The Parking lights will flash, this informs you that the Turbo Timer Feature is engaged. You
can now remove your key and leave the vehicle. The vehicle will continue to run for a period of 3 or 5 minutes. Be sure to
lock the doors using the AUX 1 button to ensure the vehicle is safe.
***Press the brake pedal at any time to cancel the feature***
***When Turbo Timer is set, Delayed Ignition Kill Feature is disabled***
Our remote starter
is delivered with factory default settings at 45 seconds (Delayed Ignition Kill). To change your turbo timer
settings from 45 seconds to 3 or 5 minutes, refer to option 17 on the programming chart.
You can remote stop the engine at anytime by pressing AUX 2 for two seconds, and pressing the Engine Start Button
4. TURBO TIMER FUNCTION FOR STANDARD
The Turbo Timer Feature is automatically engaged when you complete the ``Exit Sequence`. Our remote starter
is delivered
with factory default settings at 45 seconds (Delayed Ignition Kill). To change your turbo timer settings from 45 seconds to 3 or
5 minutes, refer to option 17 on the programming chart.
You can remote stop the engine at anytime by pressing AUX 2 for two seconds, and pressing the Engine Start Button
