9
FEATURES AND OPERATIONS
TEMPORARY DISARM
Temporary Disarm is very practical in the event where the remote transmitter is out of battery. Temporally disarm is the same
as unlocking you vehicle with the remote transmitter. The Anti-Start function will disable for a period of 30 seconds. The LED
light (located in the receiver) will flash slowly and the Anti-start function will re-engage if the vehicle is not started within 30
seconds.
ACTIVATING TEMPORARY DISARM MODE
The following sequence must be performed to bypass the Anti-Start system and to engage the Temporary Disarm Mode.
1. Ignition ON (Engine not running). You have 15 seconds to do step #2
2. Hold the brake pedal down and slowly press and release the Valet button 3 times
3. The audible beeps will confirm the system is in Temporary Disarm Mode
4. The Anti-Start system is temporary bypassed and the LED light will stop flashing
Important
: If you are not aware of the location of the disarm Anti-Start button, please ask your installer to point it out for you.
VALET MODE
When Valet Mode is engaged, the LED light (located in the receiver) will remain lit and the Anti-Start function will permanently
be bypassed until the sequence to disarm the mode is performed (Steps 1-4 outlined below).
ACTIVATING VALET MODE
To activate Valet mode, perform steps (1-4) twice. The LED light will stay ON. This indicates that the system is in Valet
Mode.
