8 / 8
S T R I P B L I N D E R X
4. OPERATION MODES
The device operates in two operating modes, DMX Mode and Chase Mode.
4.1. DMX MODE
4.1.1. Selecting DMX Mode
If letter "A" appears, means that DMX address and shows that the
DMX Mode has been activated. Letter "P" means that you are in the
Chase Mode. With “Mode” button can you change between the two
modes.
4.1.2. Selecting Channel Mode
Tap “Menu” button to select to Channel Mode. When letters "CH"
followed by 2 numbers (01,02,05,10) than you are on the Channel
Mode.
Channel Value Selection: Tap “Up
” or “Down
” to select
between the channel 01, 02, 05 and 10.
“CH:01”, all channels are controlled by one DMX channel.
“CH:02”, channel 1 and 2 are controlled by DMX channel, channel 3
and 4 by other DMX channel. You have 5 DMX channels available.
“CH: 05”, channel 1 to 5 will be controlled by one DMX channel, the 6
to 10 by other DMX Channel.
“CH :10”, each channel is controlled by one DMX Channel.
4.1.3. Selecting DMX Address Mode
Tap “Menu” button, “ A “ appears on the display following by three
numbers 001 to 512, it indicates the DMX Mode is activated.
DMX address: Tap “Up
” or “Down
” to select between the 001
and 512 DMX-address.
4.2. CHASE MODE
The unit has 16 built in programs (except Auto and Full). Creating a light show you can select any of
the build-in programs and also can control the speed which the program will be chasing.
A:001
Mode
Menu
CH:01
Mode
Menu
A
001
Mode
Menu
