13
w w w . i g o e l e c t r i c . c o m
BATTERY & CHARGING
13.1
ATTENTION! Remove the key after installing the battery to
prevent any form of loss or theft to the key or the battery.
DISCONNECTING & REMOVING THE BATTERY
Please note that the main power position of the battery lock must be in the
"On" position before pressing the "Power On" button on the display
To unlock battery for removal
Key is locked into bike and cannot be removed when in the "off" or "on" position.
To remove the battery from either of these positions:
Turn key counter clockwise to the "unlock" position (figure 13.1).
Lift handle at top of battery and lift battery out of its carrier.
You can either move seat sideways or remove seat post to
facilitate the complete removal of the battery.
To reinstall battery
You can either move seat sideways or remove seat post to facilitate the installation
of the battery. The battery has a mounting groove on the back which lines up with
the battery mounting rail as shown (figure 13.2 and figure 13.3). Slide the battery
down the mounting rail until it connects to the bike. At this time you can either lock
the battery into the bike and remove the key or operate the bike (see above).
To lock battery into bike:
Insert key into lock.
Turn key clockwise until you reach "off" position.
Battery is now locked into bike and key can be taken out.
13.2
13.3
