Appendix A: Router Configuration
5.2.1.1 Setup Wizard
Use “Setup Wizard” to take you through the basic configurations necessary to start
using iGuard.
1. Click to highlight the iGuard on the right that you want to configure.
2. Click on “Setup Wizard”.
First
, to begin iGuard Utility will request for the “Input Device Password” when
you click “Setup Wizard”.
User must enter the CD key to enter “Setup Wizard”; or “Launch iGuard”, or “IP
Configuration”.
WARNING:
Do not lose this password. If the password is lost, you can not access the device
to make changes. If you lose this password, you’ll have to contact your reseller
for the master password.
Second
, iGuard Utility will request for “Administrator authentication” after you
have passed the “Input Device Password”.
To enter, user must input “admin” [in small caps] for Account name and the CD
key for Password. Subsequently, the user may change the Account name and
Password in the “Setup Wizard”.
40
