Product overview
Operating Instructions of the dryve D3 V0.0
5/15
2
Product overview
Ready to use immediately
Connect the voltage source and the motor: you are ready to start. No complicated software installation or complex wiring of vari-
ous additional switches and sensors.
Easy control
The intuitively operated rotary elements allow you to set the speed and force limit of the connected motor without prior
knowledge. A travel movement can be started by the two buttons on the front of the dryve D3.
2.1
Technical data
2.1.1
Dimensions
The shading indicates the distance for neighbouring components.
2.1.2
Mechanical data
D x W x H dryve D3 in mm
116 x 27 x 126
Weight
150 g
D x W x H angle adapter in mm
Weight
2.1.3
Electrical data
Voltage supply
24 V, ± 2 V
Motor types
DC motor
Continuous motor current
Max. 2.5 A
Motor output frequency
Switch 4 off
8 kHz
Switch 4 on
1 KHz
Power output
Max. 60 W
Cable lengths
Max.3 m
Cable cross-sections
0.34 mm² to 1.5 mm²
Limit switch
Voltage
U
B
at X2.1
Current
Max. 10 mA
External travel movement
Voltage
5 V
Current
5mA
2.1.4
Environmental conditions
Ambient temperature
Operation
-20 °C to +45 °C
Transport
-40 °C to +60 °C
Bearing
-40 °C to +60 °C
Relative humidity
≤
90 %, non-condensating
Protection class
IP 30
Degree of soiling according to EN 61010
1
