Safety Instructions, Protective Measures and Guidelines
D8-1_EN
– V1.0
4/14
1.4
Safety Instructions
1.4.1
Classification of Information
The degree and type of hazard are assigned to one of the following classes.
DANGER!
Safety instructions marked with
DANGER
indicate an imminently hazardous situation.
A disregard of the notice
inevitably
leads to a
serious or even fatal accident
.
WARNING!
Safety instructions marked with
WARNING
indicate a potential hazardous situation.
Failure to observe this notice is
likely
to result in a
serious or fatal accident
or
property damage
.
CAUTION!
Safety instructions marked with
CAUTION
indicate potential danger.
Failure to comply with the notice may
possibly
result in an
accident
or
property damage
.
NOTE
Safety instructions marked with
NOTE
indicate a potential hazardous situation.
Disregard of the notice may
possibly
result in
property damage
.
1.5
Electromagnetic Compatibility
WARNING!
•
Risk of injury due to interference with signals and devices
Disturbed signals can cause unforeseen device reactions. Carry out the wiring in accordance with the EMC measures.
Failure to follow these instructions can result in death, serious injury, or material damage
Measures for EMC
Effect
Device assembly
Use cable clamps for the shield support,
connect metal parts over a large area.
Good conductivity due to surface contact.
Switching devices such as contactors, relays
or solenoid valves with interference
suppression units or spark suppressors (e.g.
diodes, varistors, RC elements)
Reduce mutual interference couplings.
Wiring
Keep cables as short as possible.
Avoid capacitive and inductive interference.
