Safety Instructions, Protective Measures and Guidelines
D7_EN
– V1.2
3/14
1
Safety Instructions, Protective Measures and Guidelines
1.1
Important Instructions
Read this manual carefully before operating the motor controller. Familiarise with the safety instructions and ensure that the
required safety measures are followed.
This manual was created according to the best of our knowledge and belief. It is used for technical documentation and for
assisting the user during the initial operation. The warnings, cautions and instructions issued by igus
®
regarding the motor
controller must in any case be passed on to the end user if the motor controller is used as part of an overall system.
igus
®
undertakes warranties only for igus
®
products in accordance with the standards, norms and specifications given in this
manual. The guarantee covers only the replacement or repair of a defective motor controller. There is no liability for
consequential damage and consequential errors. igus
®
does not take any responsibility for the integration of the motor controller
into the overall system. The responsibility for it lies with the plant designer or the end user. Please observe the instructions
under "
Qualified Personnel
". igus
®
assumes no liability for personal injury or damage to property resulting from misuse or
unauthorised technical modification of the motor controller.
igus
®
reserves the right to make changes and improvements to the product or the technical documentation at any time without
prior notice.
The motor controller must only be used if:
-
All information and safety instructions in this manual have been observed.
-
No changes have been made to the motor controller and it is in a technically flawless condition.
-
The operating limits that are specified in technical data
are complied with.
-
Necessary measures, if called for, have been taken for radio interference suppression depending on the operating
environment.
-
All connection cables used are strain relieved.
1.2
Qualified Personnel
The operation of the product must only be carried out by qualified personnel.
Personnel must:
-
Have read and understood this manual and documentation on the installed motor, axis and accessories.
-
Be familiar with all relevant applicable standards, provisions and accident prevention regulations.
-
Be able, due to their training, to anticipate or recognise any hazards that may arise when using the control system.
-
Ensure the safety of persons and objects when using the motor control system in the overall system.
1.3
Maintenance
The motor controller is maintenance-free.
Never open the housing of the motor controller independently, even in the event of a malfunction.
Opening the housing will void the warranty.
