iHealth BP5, Instruction Manual

If the determined blood pressure (systolic or diastolic) is outside the rated range

specified in the SPECIFICATIONS, the App will immediately display a technical alarm.
The technical alarm is preset in the factory and cannot be adjusted or inactivated.
This technical alarm is assigned as low priority according to IEC 60601-1-8. The tech-
nical alarm is non-latching and does not need to be reset.

When the monitor is connected to an iOS device, the battery volume will be dis-

played on the iOS device. It is suggested that you charge the battery when the battery
is less than 25%. The monitor will not work until the battery has enough power.

A medical AC adapter with an output of DC 5.0V and compliant with IEC 60601-

1/UL 60601-1 and IEC 60601-1-2/EN 60601-1-2 is suitable for this monitor, such as
ASP5-05010002EU (input: 100-240V, 50/60Hz, 200mA; output: DC 5V, 1.0A). Please

note that the monitor jack size is USB mini B.

This product might not meet its performance specifications if stored or used out-

side the specified temperature and humidity ranges.

Please do not use the cuff with any infectious person to avoid cross-infection.

This device is designed for adults and should not be used on infants, young chil-

dren, pregnant or pre-eclamptic patients. 

Please do not use any other cuff than that supplied by the manufacturer as this

may result in measurement errors and a biocompatible hazard.

BATTERY HANDLING AND USAGE

•

    When charging is needed, please connect the monitor to a power source. 

•

    Do not change the battery. If the battery can no longer be charged, please contact

the iHealth Customer Service.

•

    Overcharging the battery may reduce its lifetime.

- The coefficient of variation (CV) of pulse period >25%.
- The difference of adjacent pulse period ≥0.14s and the number of such pulse takes
more than 53 percent of the total number of pulses.

For information regarding potential electromagnetic or other interference be-

tween the blood pressure monitor and other devices, together with advice regarding
avoidance of such interference, please see ELECTROMAGNETIC COMPATIBILITY IN-
FORMATION. It is suggested that the device be kept 10 meters away from other wire-
less devices, such as WLAN unit, microwave oven, etc.

This product is verified according to the auscultatory method. Please check Annex

B  of  ANSI/AAMI  SP-10:2002+A1:2003+A2:2006  for  verification  method  details  if
needed.

11

! 

! 

! 

! 

! 

! 

! 
! 

!