background image

 

12

CARE AND MAINTENANCE 

 

1.

 

Do not drop this monitor or subject it to strong impact. 

2.

 

Avoid high temperature and direct sunlight. Do not immerse the 

monitor in water as this will result in damage to the monitor. 

3.

 

If this monitor is stored near freezing temperatures, allow it to 
acclimate to room temperature before use. 

4.

 

Do not attempt to disassemble this monitor. 

5.

 

If the monitor is not used for a long time, please sure to fully 
charge it every month. 

6.

 

It is recommended that product performance be checked every 2 years 
or after each repair. Please contact the service center. 

7.

 

No monitor component needs to be maintained by the user. The circuit 
diagrams, component part lists, descriptions, calibration 
instructions, or other information which will assist the user’s 
appropriately qualified technical personnel to repair those parts 
of the equipment which are designated for repair can be supplied. 

8.

 

Clean the monitor with a dry, soft cloth or a moistened and well 
wrung soft cloth using water, diluted disinfectant alcohol, or 
diluted detergent 

9.

 

The monitor can maintain the safety and performance characteristics 
for a minimum of 10,000 measurements or three years of usage,and 
the cuff integrity is maintained after 1,000 open–close cycles of 
the closure. 

10.

 

The battery can maintain the performance characteristics for a 

minimum of 300 charge cycles. Battery replacement should only be 
performed by a qualified iHealth technician. To do otherwise will 
void your warranty and possibly damage your unit. 

11.

 

Cuff replacement should only be performed by a qualified iHealth 

technician. To do otherwise will possibly damage your unit. 

12.

 

It is recommended that if the cuff is used, for example, in a 

hospital or a clinic, it be disinfected twice a week. Wipe the inner 
side (the side that contacts skin) of the cuff with a soft cloth 
lightly moistened with Ethyl alcohol (75-90%). Then air dry the cuff. 

 
 

WARRANTY INFORMATION 

The Blood Pressure Monitor is warranted to be free from defects in 
materials and workmanship within one year from the date of purchase 
when used in accordance with the provided instructions. The warranty 
extends only to the end user. We will, at our option, repair or replace 
without charge the Blood Pressure Monitor covered by the warranty. 
Repair or replacement is our only responsibility and your only remedy 
under the warranty. 

 

Summary of Contents for BPM1AE


















Reviews: