10
Troubleshooting
Item 6
(Excluded Items):
a)
Normal wear and tear.
b)
Labour.
c)
Timber work and cabinetry, including but not limited to fading, weathering, peeling, cracking, wrinkling, blistering, delaminating, surface
stains, glue and integral bonding joints.
d)
Colour therapy light
e)
Back rest, shelf (if supplied) are warranted to be free from defects for a period of seven (7) days from the time of delivery/ installation.
f)
Fuses.
Problems
Please Ensure
Sauna not turning on
Power point sauna is connected to is operational
White (lume) wire from control panel is connected into the correct outlet on
control box. See page 7
Temperature
Check the temperature setting on the control panel and reset if required. Refer to
page 6 for instructions.
Check the temperature sensor cable is connected to the control box in the roof
and the head is visible inside the sauna. Unscrew plate in roof and pull sensor
head down slightly. Reattach plate.
Lights not turning on
Light 1 and Light 2 buttons are pressed after power button on sauna is pressed.
See Page 6
Light connectors are plugged in correct outlet on control box. See page 7
Sauna not heating
Sauna on/off button pressed for a second time after sauna is turned on initially
There is ‘time’ in the time display on the control panel. See page 6
All 4 heater cables are connected correctly into control box. See page 7
The Auto function (middle light) is turned off
Movable heaters not heating
The switch on top of the heaters is pointing towards the cord
Stereo is not working
Power and antenna are connected correctly. See Page 7
Sauna continually beeps when turned on
Ensure the temp sensor cable is plugged into the correct input in control box. See
page 7
Summary of Contents for SAUNAS
Page 1: ...1 Owner s Manual...
