background image

14

Particle size (MMAD)

Approx 2-5 μm

Aerosol Output // Rate

0.3ml (2ml, 1% NaF) // 

0.15ml/min (2ml, 1% NaF)

Noise level (At 1 m )

55 dBA

Operation cycles

30 min on then 30 min. off

Operating requirements

Temperature min. +10

o

C - max 40

o

C

humidity min. 30-85% RH, Pressure 

min. 600 hPa, max. 1060 hPa

Storage & transport requirements Temperature min. -10

o

C - max 60

o

C

requirements humidity min. 10%, max 

95% RH Non condensing, Pressure 

min. 600 hPa, max. 1060 hPa

Dimension of compressor 

(L x W x H)

140mm x 146mm x 101mm

Products weight

1.35 Kg approximate

Standard accessories

Compressor nebulizer machine

Adult mask

Child mask

Filter 2 pcs

Air tube

Medical cup

Mouthpiece

* The specifications and the outer design are subject to change for im

-

provement reasons without previous notice.

Electromagnetic compatibility

This aerosol therapy unit is designed to meet the current requirements for 

electromagnetic compatibility. However if you suspect that the unit is inter-

fering with the operation of your TV, radio or other electrical appliance, try 

relocating the unit until the interference ceases. Alternatively try plugging 

the unit into a different power socket. The manufacturer reserves the right 

to introduce technical changes. Do not use devices that generate strong 

electromagnetic fields near this device. It may result in incorrect operation 

and potentially hazardous situation.

This medical device confirms to EN60601-1-2:2007 standard for electro

-

magnetic immunity and emissions.

Summary of Contents for iWind

















Reviews: