OPERATION
9VX3
PRECAUTION ON USE OF RUBBER TRACK SHOE
FflCAUTSON'l
The rubber track shoe may be damaged or worn faster depending on working conditions.
Perform working operation properly according to working site conditions and machine operation.
Structure of Rubber track Shoe
The right illustrates the structure of rubber track
shoe. It consists of steel cord to sustain tension,
iron core to support it, and covering rubber to
them.
CAUTION I
If a crack reaches the steel cord, of may
be rusted and cut off by moisture.
When any crack is detected, repair it
immediately with vulcanizer.
Cracked
cord
■
Precaution on Use
1.
Adjust the track often enough to keep a
proper tension.
Insufficient tension slips off the rubber track
shoe and wears out the sprocket and iron
core extremely.
Excessive
tension
increases
travel
resistance, which prevents proper travel
force and speed. It also causes damages
and extreme wear at undercarriage as well
as overextension of the rubber track shoe.
2.
To prevent damages of the rubber track
shoe, avoid the following in travel as much
as possible.
Pointed rocks or quarry
Craggy place such as riverbed or path
through woods
Steel rods or scraps
Steel
board
or
cornered
objects
of
concrete
Heat source such as acre
Travel in contact with concrete path or wall
3. Immediately wipe off spilt fuel, hydraulic oil,
or grease on the rubber track shoe with a
cloth.
4. Avoid sudden spot turns or pivot turns.
Make slow turns several times at a low
speed.
5. Do not use for long (3 months or more).
Store it to avoid direct sunlight or rain.
6 . Use the rubber track shoe at a temperature
between -25°C and +55°C (-13°F and
131°F) because of a rubber’s characteristic.
3 - 1 3 - 1
Summary of Contents for 9VX3
