CONTROLS
IC120 ENG
2-11
Hour meter
The accumulated working time is indicated in units of
1/10 hour (6 minutes).
The meter advances if the engine runs, even though
the machine does not work.
The total service hours serve as the standard of
inspection and maintenance.
Engine emergency stop switch
Use this switch to stop the engine emergently in such a
case where the brake does not work and the machine
does not stop running even though the travel lever is set
to the neutral position while moving down a slope.
Stop:
The engine stops when the switch is pressed.
Reset: Turn the switch clockwise. It is unlocked and the
engine can be started.
Parking switch
Push this switch to apply the parking brake.
ON:
Press the position with the P mark. The parking
brake is applied and the mark lamp goes on.
OFF: Press the position with no mark. The parking
brake is released and the mark lamp goes out.
Cigarette lighter
The switch is turned on automatically when the knob is
pushed down. It is pushed out several seconds later.
Pull it out and use it.
