iHome iBN4A, Instruction Manual

iBN4

Using the

4

P8

Using Bluetooth: 

Pairing and Playing Your Device 

Using NFC

This unit features wireless NFC pairing, which allows playing NFC–enabled devices to pair and play 

instantly. For pairing non-NFC devices, please see the following section “Using Bluetooth: Pairing Your 

Device Manually”.

1.  Turn on your Bluetooth–enabled/NFC–enabled device and turn on NFC capability      

 (typically under ‘Settings’) as described in the device’s user manual.

2.  Place your NFC–enabled device in play mode.

3.  Turn the dial on the speaker unit to      mode.

4.  Touch the     area of your playing NFC device against the        

antenna on top of the unit. The unit will enter automatic pairing 

mode, tones will sound and “PAIR” will flash on the display while 

the unit attempts to pair.

If prompted, accept Bluetooth pairing.

“iHome iBN4” should appear on your device’s menu under 

Bluetooth Settings. Once paired with a device, the PAIR indicator 

will stop flashing, the Bluetooth icon will remain and your music will 

play through the unit.

5.  Use the controls on your device to play or pause audio and navigate tracks.

6.  Turn the 

Volume Dial 

to adjust the volume on the unit. You can also adjust volume on your device. 

7.  When done listening, turn the Power dial to turn the unit OFF. Remember to turn off your audio device, 

too. 

NOTE

: To disconnect your device, simply touch it again on the    antenna of the unit. To pair a device 

manually, please see the following “Using Bluetooth: Pairing Your Device Manually” section.

8/27/2013