iHome iBT210, Instruction Manual

7

Setting the Clock

1.  Press and hold the 

Sleep/Clock Adjust Button

 located on the back of the unit 

for 2 seconds until the clock display flashes and a beep sounds.

2.  Press the         or        Buttons to adjust the clock to the current time (hold for rapid 

setting). Make sure you set the correct AM/PM time. The AM and PM indicators 
appear to the left of the display. 

3. Press 

the 

Sleep/Clock Adjust Button

 to confirm the time. The year will flash on the display. 

4.  Press the        or        Buttons to adjust the clock to the current year (hold for rapid 

setting). 

5. Press 

the 

Sleep/Clock Adjust Button

 to confirm the year. The date and month will flash on the 

display. 

6.  Press the      or        Buttons to adjust the clock to the current date and month 

(hold for rapid setting).

7.  Press the Sleep/Clock Adjust Button to confirm the date and month and exit clock setting mode. 

2 beeps will confirm clock setting is complete. 

TIP: To toggle the clock display between standard 12 hour time and 24 hour (“military”) time 

display, press the     Alarm Button or      Alarm Button while the display is flashing during clock 
setting.

Setting and Using the Alarms

This unit features dual alarms which can be set to different times and alarm sources. Each is set in 
the same way. Instructions are given as “Alarm Button”; use    Alarm  Button or    Alarm Button to 
set respective alarms. Note: Each step must be completed while display is flashing or step will 
time-out with any changes saved.

Using the 

iBT210