P10
9
Snooze/Display Dimmer Button
1. To program Snooze,
press and hold
the
Snooze/Display Dimmer Button
during normal operation
(when no alarm is sounding).
2. Press the or
Buttons
to select the desired snooze time (between 01 and 29 minutes).
3. Press and release the
Snooze/Display Dimmer Button
to confirm Snooze setting. 2 beeps will sound.
• While the alarm is sounding, press and release the
Snooze/Display Dimmer Button
to temporarily
silence the alarm for the set duration (9 minutes is the default). Snooze can be used several times during
the one hour alarm cycle.
• To adjust the brightness of the display, press and release the
Snooze/Display Dimmer Button
during
normal operation (when no alarm is sounding) to cycle through the brightness display settings, including
OFF.
Sleep Mode
This unit allows you to sleep to the current sound source for a set time before turning the unit off.
1. To set Sleep time, press and release the
Time Set/Sleep Button
as needed to cycle to the desired sleep
duration:120, 90, 60, 30 or 15 minutes or OFF (turns the unit off).
2. Press the
or
Buttons
to adjust the sleep volume on the unit. Note that the sleep volume setting is
stored separately from other volume settings.
FM Radio
Extend the FM antenna for best reception.
1. Press and release the
Power/Alarm Reset
Button
to turn the unit on.
2. Press and release the
Mode Button
as needed until the FM indicator icon and current FM radio
frequency appear on the display.
3. Press the
or
Buttons
to tune the radio to the desired station (hold to scan for the next clear
station).
4. Press the
or
Buttons
to adjust the volume on the unit.
5. When you are through listening, press the
Power/Alarm Reset
Button
to turn the unit off.
Using the
iBT29
