iHome iBT4, Instruction Manual

iBT4

Using the

6

Playing Audio via Line-In

1.  Connect one end of the included stereo 3.5mm audio cable into the line-in jack on the back of 

the unit and the other end into the headphone or output jack of your audio device

. 

 NOTE

: The unit defaults to Line-in mode when the audio cable is connected. It will not play FM radio 

or Bluetooth audio in this mode.

2.   Turn the 

Power/Mode Dial

 RIGHT (to any mode) to turn it on.

3.   Power on the audio device and use the controls on the device to play or pause audio and navigate 

tracks. 

4. Turn 

the 

Volume Dial

 to control the system volume.

5.  When done listening, turn the 

Power/Mode Dial

 to the OFF position (left) to turn the unit off. 

Remember to unplug the audio cable. 

Playing Audio via Line-out

You can connect the unit to an external speaker via the Line--out jack located on the back of the unit to 
expand the audio playing from the iBT4
1.  Connect a 3.5 mm audio cable plug to the Line-out jack on back of the unit and connect the other 

end to the line-in jack on your external speaker. Note that the line output signal is mono.

2. Turn the 

Power/Mode Dial

 RIGHT (to any mode) to turn the unit on. The audio from the iBT4 will 

play from both the unit’s speaker AND from the Line-out jack. 

3.   Turn the 

Volume Dial

 to control the system volume. The Volume Dial does NOT affect the output 

volume of the line out jack.

4.  When done listening, turn the 

Power/Mode Dial

 to the OFF position (left) to turn the unit off. 

Remember to turn off any connected audio device, too.

 NOTE

: The Line-out jack is NOT a headphone jack.