iBT4
Using the
4
Using Bluetooth: Pairing Your Device
1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s
user manual.
2. Turn the
Power/Mode Dial
right
to turn the unit ON (pairing is available in any mode).
3. Press and hold the
Pairing/Play Pause Button
on the unit for 2 seconds to begin
pairing the unit with your device. “PAIR” will flash on the display, indicating pairing attempt.
“iHome iBT4” should appear on your device’s menu. If “Not Connected” or similar message appears,
select “iHome iBT4” on the device to connect it. If your device asks for a password, enter
1234
or
0000
on the keyboard of your device. If no device is paired within 2 minutes, a tone will sound and
the unit will revert to its previous mode. To retry pairing, turn the
Power/Mode Dial
to the OFF position
(left) then follow steps 2 & 3 again.
4. Once paired with a device, the
PAIR
indicator on the display will stop flashing then disappear and
the Bluetooth icon will remain. On some devices, you must then select “Use as Audio Device” or similar
on the device’s Bluetooth menu. Once paired, your device should link to the iBT4 whenever within
range (about 30 feet).
NOTE: The unit can auto-link with up to 3 previously paired devices.