background image

iBT82

FCC Information

This device complies with Part 15 of the FCC Rules, operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 

environment. 

This Device complies with RSS-247 of the IC Rules; Operation is subject to the following two 

conditions: 

(1) This device may not cause interference and   

(2) This device must accept any interference received, including interference that may cause 

undesired operation

•  Warning: Changes or modifications to this unit not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.

•  NOTE: This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected.

•  Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

IC Statement

 

This device complies with Industry Canada RSS-247. Operation is subject to the following two 

conditions: (1) this device may not cause interference, and (2) this device must accept any 

interference, including interference that may cause undesired operation of the device. 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio 

RSS-247. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas 

produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique 

subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and 

compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure 

and compliance. 

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 

102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne 

sur l'exposition et la conformité de rf.

Declaration ID D025615

FCC ID: EMO-IBT82

IC: 986B-IBT82

Summary of Contents for iBT82














Reviews: