iHome iBTW23, Manual

5

S E T T I N G   T H E   T I M E

1.  Press and hold the 

Clock Button 

on the top of the unit.  A beep will sound 

and the TIME will flash on the display.

Press the 

+

 or 

–

Buttons

 to set the correct time (hold for rapid 

adjustment). Make sure to set the correct AM or PM time. (The PM 
indicator appears to the left of the  time display; there is no AM indicator.)

NOTE

: The display can be set to standard 12 hour time (AM and PM) or to 

24 hour time. To toggle between 12 and 24 modes, press and release the        
   

Alarm  1 

or

      Alarm 2 Button

  at any time while display is flashing 

during time setting mode.

2.  Press and release the 

Clock Button

 to confirm the current time setting. 

The YEAR will flash on the display. Press the 

+

 or 

–

Buttons

 to set the 

correct year.

3.  Press and release the 

Clock Button

 to confirm the current year setting. 

The DATE will flash on the display. Press the 

+

 or 

–

Buttons

 to set the 

correct month and day (hold for rapid adjustment).

4.  Press and release the 

Clock Button

 to confirm the current date setting. 

Two beeps will sound to indicate time setting mode is complete. 

SETTING THE DAYLIGHT SAVING TIME (DST) SWITCH

This unit has a 

DST switch

 on the bottom of the unit in the battery 

compartment to adjust the time for daylight saving time and standard time. 
By default, it is set to Auto and will automatically adjust the time at the start 
and end of daylight saving time. If you are located in an area that does not 
observe daylight saving time or otherwise wish to adjust manually, slide the 
switch to +1 to add one hour or to –1 to subtract an hour.