Playing your iPad, iPhone or iPod
1. Make sure the unit has a power source (4 AA batteries are installed or AC adaptor is
connected).
2. Open the cover on the unit to expose the flexible 30 pin connector.
3. Gently dock a playing iPad, iPhone or iPod. The unit will power on and in a moment, you
will hear the audio from your device.
4. If the volume on your sound source is too low, the unit may not detect it/turn on. If this
happens, press the
Button
to turn the unit on.
5. Control your iPad, iPhone or iPod music using its iPod controls.
Use the
/
– Buttons
on the unit to adjust system volume.
6. When you are done listening, press the
Button
to turn unit off.
P7
4
Playing Audio via Aux
1. Connect a standard 3.5 mm stereo audio plug to the headphone or line-out jack on your
audio device and the other end to the line-in jack located on the back of the unit.
2. Press the
Button
to turn on the unit.
3. Turn on your audio device and place it in play mode.
4. Use the
/
- Buttons
to adjust volume. You may wish to adjust the volume on your
audio device, too.
5. When done listening, press and release the
Button
to turn the unit off. Remember to turn
off your audio device, too.
