iD8
Using the
Using the Line-in Jack
The
iD8 has an aux line-in jack located on the back of the unit for listening to
any audio device equipped with a headphone or line-out jack.
Note
: Do not connect a device to the line-in jack while an iPad, iPhone or
iPod is docked or you will hear both sources playing at once.
1. Plug one end of a standard 3.5mm audio cable into the headphone jack
or line-out jack of your device and the other end into the line-in jack on the
iD8.
2. Press the
Power Button
on the iD8.
3. Use the play control on your device. Adjust the volume to the desired
listening level with the
–
/
+ Volume Button
. You may need to adjust the
level on your audio device, too. NOTE: To save battery power, this unit
has lower volume output when operating on the internal battery.
4. When you are done listening, press the
Power Button
to turn off the unit.
Remember to turn off the power on your audio device, too.
6
P10
