background image

Listening to Radio

5

Listening to iPad, iPhone or iPod Using the Dock or USB Port

Sure Alarm

The unit has a sure alarm feature so the buzzer alarm still sound in the event of a power failure, if  the backup battery is installed (see 
page 7). If your iPad/iPhone/iPod has no sound for 35 seconds or is not present, the unit will switch to buzzer alarm automatically.

Setting up the Antenna

Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.

Tuning and Playing the Radio

1. Press and release the 

Mode Button

 as needed to cycle through Dock, USB, FM radio and Aux-in modes.

2. When FM mode is selected, press the  

or

 – Button

 to tune the radio to a desired station. The current radio frequency appears in 

the lower right of the display.  Press the  

or

 – Button

 for a few seconds to scan for the next clear station.

3. 

To memorize a station as a preset

 A. 

Press 

the 

Radio Presets Button

 as needed to step through the 6 presets (P1 - P6) to the number you wish to assign, and then 

hold the 

Radio Presets Button

 until the selected preset number begins flashing in the display. 

  B. Press the  

or

 – Button

 to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the next clear 

station. 

 C. 

Press 

the 

Radio Presets Button

 to confirm the setting, two confirmation beeps will confirm the setting and the preset number you 

wish to assign. Repeat steps A-C to preset up to 6 stations. 

4. To listen to a preset station, press the 

Radio Presets Button

 to choose the desired preset. 

5.  Press the      or       

Button

 on the unit to adjust the system volume. 

This unit features both a Lightning dock (located on top of the unit) exclusively to play and charge iOS devices equipped with the latest 
Lightning connector AND a USB port (located on back of the unit) which can play and charge both older iOS devices (such as iPhone 4, 
iPad, etc.) AND Lightning devices using the charging cable that came with the device.
Play and pause a device connected to the Lightning dock using the      

Dock Button

, and play and pause a device connected to the USB 

port using the       

USB Button

. Only one device can play at a time. Directions below apply to whichever dock/port you wish to control.  

1. 

Connecting using the Lightning Dock

: Dock an already playing iPad mini, iPad with Retina display, iPhone 5 or iPod touch 5th 

generation in the Lightning dock on top of the unit. The unit will automatically turn on and you will hear the audio playing from your 
iPad/iPhone/iPod.

 

Connecting using the USB port

: Connect your iPad, iPhone or iPod to the USB port located on back of the unit using the USB 

charging cable that came with it.

Note:

 If the audio source volume is too low on the iPad/iPhone/iPod, the unit may not detect that the iPad/iPhone/iPod is in play mode. 

If so, pressing the      

Dock

 

Button

 or      

USB Button

 on the unit once should make it play.

2.  When an iPad/iPhone/iPod is docked to the Lightning dock or connected to the USB port and in standby mode, press the        

Dock

 

Button

 or       

USB Button

 on the unit to play the iPad/iPhone/iPod. If the unit is already on, press and release the 

Mode Button

 as 

needed until “Dock” or “USB” appears on the lower part of the display, indicating which dock/port on the unit is in iPod mode. If your 
iPad, iPhone or iPod touch is in video mode, you may see the “locked” slider on the iPad/iPhone/iPod display. If so, you will need to 
unlock your iPad/iPhone/iPod. 

3.  Press the      

Dock

 

Button

 or      

USB Button

 on the unit on the unit to pause play; press again to resume play.

4.  Press the  

or

 – Button

 on the unit to go to the next or previous track. Press and hold while track is playing for high speed forward 

or reverse music search of the current track. 

Adjusting Sound on the Unit 

You can adjust the sound on the unit while listening to any sound source.
1.  Press the      or        

Button

 on the unit to adjust the system volume. 

2. Press and release the 

EQ Button

 as needed to select Treble, Bass, Balance or 3D sound effect, then press the  

or

 – Button

 to 

adjust settings.

TIP: You can also adjust EQ with the iHome Set app.

P7

Summary of Contents for iDL45














Reviews: