Using Bluetooth: Pairing Your Device
NOTE
: See the iDM15 Bluetooth Connection Guide for complete pairing details.
1. Move the
Travel Lock/Aux/Bluetooth Switch
on the back of the right speaker to the
Bluetooth position (right).
2. Press and hold the
Button
to turn on the unit (release when light appears blue).
3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s
instructions to add or setup a Bluetooth device).
4.
Press and hold
the
Bluetooth/Speakerphone Button
on the unit until a blue light flashes
on the button and the unit beeps twice to indicate pairing attempt. The blue light will flash
while the unit attempts to pair. If your device asks for a password, enter
1234
on the
keyboard of your device.If no device is paired within 2 minutes, the
Button
will glow
red for 2 seconds and the unit will power off. If this occurs, retry steps 2-4.
5. Once paired with a device, the blue light will glow steadily. There should be an
indication on your device that pairing is complete. On some devices, you must then select
“use as a stereo audio device” or similiar on the device’s Bluetooth menu. Once paired,
your device should link to the iDM15 whenever within range.
P8
4
