4
Batteries Installation
Install/Replace Batteries
The iH19 uses 4 “AA” batteries for portable playing. The iH19 will not charge your iPod while operating on batteries.
If sound becomes weak or distorted, it is time to replace the batteries.
• Open the battery compartment cover located below the jacks on the unit.
• Insert 4 “AA” batteries as indicated.
• We recommend the use of alkaline batteries for longer life.
NOTE: AC adaptor does not charge batteries
Batteries information:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium) batteries.
Using the Line-in and Headphone Jacks
a) An audio patch cord comes with the iH19. Use it to play nondocking iPod models or other audio devices through the
iH19
Line-in Jack (one end in the device’s line out or headphones jack, the other in the iH19 line in jack). Make sure
there is no iPod connected to the iH19 when using the
line-in jack. Press the
PLAY button to mute or unmute
line-in source.
b) Use the
Headphone Jack on the iH19 to disable the speakers and listen to your iPod privately.
Hold Switch
The iH19 has a
Hold Switch to disable button functions while on the go to prevent accidental playing of the iPod and
loss of battery power. Move
Hold Switch to ON position to lock up button functions. Move the
Hold Switch to OFF
for normal button function.
