iHome iH33, Quick Start Manual

    1.  Press and hold the 

Time Zone Button

 located on the back of the unit until the current time zone  flashes. Press the  

or

      Button

 to select your time zone. 

    2.  Press the 

Time Zone Button

 again (or no button within 10 seconds) to exit the setting mode.

3.  If time displayed is not correct, see Setting Time and Calendar to set the clock.

Setting Time and Calendar

Depending on your location and whether or not  Daylight Saving Time (DST) is in effect, set the 

DST Switch

 located   

on the back of the unit to +1 to add an hour for Daylight Saving Time or to -1 to subtract an hour for Standard Time. 
    1.  Press and hold the 

Clock Adjust Button

 located on the back of the unit until the current time flashes on the display.   

Press the 

or

      Button

 to adjust to correct time (holding the button for few seconds will advance or reverse rapidly).

2.  Remember to set the correct 

AM

 or 

PM 

time

. The 

PM Indicator

 is located above the minute digits.

3.  Press and release the 

Clock Adjust Button

 to adjust year. Press the 

or

      Button

 until the current year is displayed. 

4.  Press and release the 

Clock Adjust Button

 again to adjust month and date. Press the   

or

       Button

 until the current 

month/date is displayed. Holding the button for a few seconds will advance or reverse rapidly.

5. Press and release the 

Clock Adjust Button

 again (or no button within 10 seconds) to exit the time/calendar setting 

mode. You will hear two beeps to confirm Time and Calendar setting are completed.

Using the Alarms

Setting the Alarms

1. By default, the unit selects iPod as your wake source. If no iPod is docked or detected, the iH33 will automatically default 

to buzzer alarm.

Note:

 make sure you have an hour of audio on your iPod.

2.  Press and hold the 

     Button

 until the current alarm time flashes in the lower part of the display. Press the  

or 

      Button

to set the alarm time. Remember to set the correct AM or PM time.

3.  Press and release the 

      Button

 (or if no button is pressed within 10 seconds). Two beeps will confirm alarm time and 

exit alarm setting mode. The alarm will be armed and the corresponding alarm icon will appear. 

4.  To set Alarm 2 just follow steps 2 - 3  using the 

      Button

.

Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)

1. Once an alarm is set, it is armed and the lower part of the display will show the alarm time. If both alarms are armed, 

the earliest alarm time will show.

2.  To arm/disarm the alarm, just press and release the associated alarm button to toggle it on or off. If the alarm is armed, 

the related alarm icon will appear in the upper part of the display.

Resetting the Alarm to Come on the Next Day

1.  When the alarm is sounding, press and release the 

      Button

 to stop alarm and reset it to come on the following day..

Using the Unit

4