A U T O E M P T Y B A S E M A I N T E N A N C E
1 8
Auto Empty Base Dust Bag
The Auto Empty Base will indicate when the dust bag is full on the smart LED display panel (Dust bag indicator will be green).
Discard of dust bag once full and replace dust bag with a new one.
NOTE:
Extend the dust bag handle to seal the debris hole.
Open Cover
Pull up the dust bag
from handle
Discard the old
dust bag
Replace with new dust bag &
fully lower cardboard handle
Close cover
Filter Maintenance
If the Auto Empty Base indicator light flashes or the trash icon is solid green and
the dust bag is not full, it is time to clean the filter.
1:
Unplug the Auto Empty Base and turn it over. Use a Philips screwdriver to remove the screws
as shown in the figure to the right. Open the dust duct cover to clean out any dirt and debris.
2:
Open the exhaust at the rear of the Auto Empty Base, clean the filter, and reinstall.
Dust Cover
Filter
Summary of Contents for iHRV7
Page 1: ...Owner s Guide Model iHRV7...
