iHome iHv330, Manual

6

FM OPERATION

OPERATION

BLUETOOTH

 USB OUTCHARGING FUNCTION  

Using the Oucharging Port on the rear of the unit to charge the proper device which adapts 

to the power input DC 5V, 1A.

1. Press  the       button  to power on the unit.

2.Press the FM/BT  button repeatedly to select the FM  mode. The FM frequency indicator will 

light up.

3.Press and hold either the        or      button to automatically search for a station, it will stop 

and play when a station is found. 

   NOTE:  Press the        or        button repeatedly to fine tune the received station.

4. Press and hold the MEM/        PAIR button , "P04" will blink on display, then press the

             or       button to select the storage location(P01-P20).

5. Press the MEM/       PAIR button again to confirm the setting.

6.Repeat steps 3 - 5 to search and store the desired stations. 20 stations can be stored in total. 

Or press and hold the SET button to scan and store the available stations automatically.

7. Press the MEM/ PAIR button repeatedly to recall and select the desired stored station, The 

LED display will show the frequency of the preset station selected.  Then the unit will start 

playback.

8. Press the ALARM 1/    or ALARM 2/      button to adjust the volume.

NOTE:  Fully extend and relocate the FM antenna to get better reception.

1.)   Press  the      button  to power on the unit.

2.)  Press the FM/BT button  repeatedly to select the Bluetooth mode. The Bluetooth indicator   

   will light up and blink.

3.)  Activate the Bluetooth function on your Bluetooth enabled device and try to search the   

   unit. 

4.)  When the pairing name "iHv330" appears on the pairing list, select it and make connection. 

5.)  After successful connection, the Bluetooth LED indicator will stop blinking.

6.)  During playing:

Press the ALARM 1/      or ALARM 2/    button to adjust the volume.

Press the MEM/    PAIR button to pause, press it again to resume normal playing.   

Press the       or         button to skip to previous or next track. 

7.)  Press and hold the MEM/      PAIR button to disconnect the current connection if you want   

   to pair with another Bluetooth Dvice. 

NOTE: The unit will be automatically connected with the last paired Bluetooth Device if their    

        Bluetooth function are activated and they are in working range.