Using the
K3
P10
9
Charging Devices Using the K-Cell
Charge K-Cell fully before use. For first time charge, charge for at least 3
hours.
Connect the USB cable plug included with your device to the standard
Charging Port on the top of the K-Cell and connect the other end to the device
you wish to charge. To charge an Android or Windows phone you may use
the USB to micro USB cable supplied with this model. To charge an Apple
IOS iPhone or iPod, with either Lightning or 30-pin connector, use the
charging cable that was supplied with your Apple device.
Bypass Charging Mode:
To charge a device when the inserted K-Cell is depleted but power remains in
the K3 internal battery,
press and hold
the
Power Button
for about 5 seconds to bypass the K-Cell and
charge directly from the K3. All LEDs will flash twice to indicate bypass charge mode. The internal battery
charge indicator will remain lit. The K3 will not play in Bypass Charging Mode. To exit this mode, press
the
Power Button
or connect the K3 to AC power.
5 SECS
