background image

6

7

T H E   R E M O T E   C O N T R O L

The unit comes with a magnetized remote control which fits into a slot 

on the top of the unit. The remote comes with one CR2032 battery 

already installed. Remove the battery tab to use the remote. 

T H E   R E M O T E   C O N T R O L   -   C O N T I N U E D

When the range of the remote seems reduced or if it ceases to work 

properly, it’s time to replace the battery.

Play/Pause  Button 
•   Switches iPhone or iPod in dock

between Play and Pause modes

Track  Buttons
•   Skip to next or previous track
•   HOLD to scan reverse or forward 

within a track 

Power Button
•   Turns unit ON or OFF. 

Lower/Raise Volume
•   Raises or lowers volume

of the unit

Mode Button
•   Cycle through modes:  

 iPod and FM radio

WARNING: Lithium batteries can explode or cause burns if 

disassembled, shorted, recharged, exposed to water, fire, or high 

temperatures. Do not place loose batteries in a pocket, purse, or other 

container containing metal objects, mix with used or other battery 

types, or store with hazardous or combustible materials.  Store in cool, 

dry, ventilated area. Follow applicable laws and regulations for transport 

and disposal.

1.  Press point of a pin or paperclip 

firmly into the hole by the battery 

compartment cover on the rear 

of the remote control to release 

the cover.

2.  Slide battery compartment cover 

off (remove old battery if 

replacing).

3.  Place new CR2032 in battery 

well as shown (make sure + side 

is facing up).

4.  Replace battery compartment 

cover.

Battery compartment
cover

Summary of Contents for IP 4 SRS TRUBASS














Reviews: