3
P7
Using Bluetooth: Pairing Your Device
NOTE
: See the iP76 Bluetooth Connection Guide for complete pairing details.
1. Press the
Button
to turn on the unit (release when buttons light up). The
Button
will flash
slowly.
2. Turn on Bluetooth capability on your device and make it discoverable (see your device’s
instructions to add or setup a Bluetooth device).
3.
Press and hold
the
Button
on the unit until the button flashes blue and the unit beeps twice
to indicate pairing attempt. The
Button
will flash rapidly while the unit attempts to pair.
4. “iP76” should appear in your device’s list of Bluetooth devices; its status display may
indicate “not paired” or “not connected”. Select iP76 to connect. If your device asks for a
password, enter
1234
on the keyboard, keypad or display of your device. If no device is
paired within 3 minutes, the pairing attempt will stop. If this occurs, retry steps 2-4.
5. Once paired with a device, the
Button
light will glow steadily blue and one beep will
confirm that pairing is complete. There should also be an indication on your device that
pairing is complete. On some devices, you must then select “use as a stereo audio device”
or similar on the device’s Bluetooth menu. Once paired, your device should autolink to the
iP76 whenever within range.
