iHome iP76, User Manual

P8

4

Playing Audio Via Bluetooth 

1. Press and release the   

 Button

 to turn on the unit. The    

Button

 light will flash blue as the  

  unit searches for a previously paired device, and then turn solid blue when a previously  
  paired device is detected.

2. Press and release the    

  Button

 on the unit to play or pause audio from your Bluetooth device. 

3. Use the          

Volume Buttons

 on the unit to adjust volume.

4. When done listening, press the 

    Button

 to turn the unit off.

Playing and Charging Your Docked iPhone or iPod 

1. Press the     

Button 

to select iPod/Line-in mode. 

2. Select the included insert for your iPhone or iPod model and press it gently into the dock.  

  (Inserts provide the best stability. However, if you have a different model iPhone  

  or iPod, you can still dock it, provided you always do so carefully and gently.If 

  you prefer to dock using an insert, please contact iHome at 1-800-288-2792 
  to purchase one.) To remove an insert, place a thumbnail in the slot, press in 
  and pull gently upwards.

3. Gently dock your playing iPhone or iPod into the dock on top of the unit. In a moment, the  

  unit will power on and you will hear the audio from your iPhone/iPod. While docked and  
  unit is connected to AC power source, your iPhone or iPod will charge until fully charged.

4. If your iPhone or iPod is not in play mode, press the     

Button

 to turn on the unit.

5. Press and release the    

  Button

 to play or pause your iPhone/iPod. Use iPod transport  

  controls on your iPhone or iPod to skip tracks, advance, etc. 

6. Use the          

Volume Buttons

 to adjust volume.

7. When done listening, press the 

    Button

 to turn the unit off.