15
English
Visit our website for additional network setup instructions: www.ihomeaudio.com/support/airplay/
Congratulations, you have successfully connected your iW4 to your wireless network. Verify that the
Network Status LED
is green and that the
Network Status Indicator
icon shows signal strength to confirm if the iW4 is successfully connected to a network. Keep reading on the other
side of this guide to start using AirPlay and other iW4 features.
Follow this method if you have a wired home network or prefer the performance of a direct
connection with router.
Using an Ethernet cable (not provided):
1. Press & hold the
Power button
(4 seconds) to power OFF the iW4 network.
2. Connect an ethernet cable to the iW4 rear
Ethernet Port
and to your router (or network).
3. Press & hold the
Power button
(4 seconds) a second time to power ON the iW4 network and establish a direct ethernet connection.
Option D - Connecting directly via Ethernet
Success!
Connected
Not Connected
Network Problem?
If the
Network Status LED
is green, the iW4 is
connected to a network
pow
er
sync
alarm skip
alarm 2
alarm 1
presets
eq
nap
aux-in
network setup
status
12V 3.5A
network setup
status
If the
Network Status LED
is flashing red, the iW4 is not
connected to a network because, either:
- The iW4 has not been connected to a Wi-Fi network
- There is a problem with your Wi-Fi network
- Or, the iW4 is out of range
Reset the iW4 Network:
- Press & hold the Power button (4 sec.) to turn network OFF.
- Press & hold the Power button again to reactivate the network.
- Visit our website for additional instructions and support.
power
sync
alarm skip
alarm 2
alarm 1
presets
eq
nap
powe
r
sync
alarm skip
alarm 2
alarm 1
presets
eq
nap
aux-in
network setup
status
12V 3.5A
network setup
status
power
sync
alarm skip
alarm 2
alarm 1
presets
eq
nap
pow
er
sync
alarm skip
alarm 2
alarm 1
presets
eq
nap
aux-in
network setup
status
12V 3.5A
Summary of Contents for iW4
Page 26: ...www ihomeaudio com...
