iHome SMARTDESIGN iC16 series, Instruction Manual

4

Using iC16

Install AC Adaptor

Connect the AC adaptor cable plug into the AC adaptor jack on the back 
of the iC16, then plug the AC adaptor into the wall outlet.

Charging Your Android

Installing/Replacing Batteries for Portable Operation

The iC16 uses 4 “AA” batteries for portable operation. The iC16 will not    
charge your Android while operating on batteries.
If sound becomes weak or distorted, it is time to replace the batteries.
• Open the battery compartment cover located on the bottom of the 

unit.

• Insert 4 “AA” batteries as indicated. Replace battery compartment 

cover.

• We recommend the use of alkaline batteries for longer life.
NOTE: To save battery life, when running on batteries, unit will 
automatically power OFF after 3 minutes of non-use (no song playing). 
Batteries information:
• Do not mix alkaline, standard (carbon -zinc) or rechargeable 

(nickel-cadmium) batteries.

Connect your Android to the included USB cable and plug the standard USB plug into the USB charging 
port on the back of the unit. Move the USB Mode Switch to the B position. Observe the charging status 
on your device. If device does not charge, try the A position.

While your Android is connected to the USB Port in the unit and the unit is connected to AC power, 
it recharges until fully charged. Device will not be overcharged. 

Unit will not charge Android devices 

when operating on batteries.

RESETRESET

TESTTEST

RESETRESET

TESTTEST