T R O U B L E S H O O T I N G
Symptom
Possible reason
Solution
Unit won’t turn on
Device does not
respond to the
unit and/or
device is playing
but no sound
comes out
Unit won’t turn off
AC adaptor isn't plugged into
a working wall socket or not
plugged into the power jack
on back of the unit
Audio cable and device are
not connected properly
Unit is not properly connected
to power source an/or Power
Button is not ON
This unit uses audio detect
circuitry to enable alarm apps
to function properly. The
power button is disabled
when playing audio from a
device.
Plug the AC adaptor into a
working wall socket and plug the
connector into the supply jack on
the unit. Make sure any associated
wall switch that controls the outlet
the is ON.
Check the volume setting on your
device. Make sure your device is
working properly before
connecting. Check that the audio
cable is firmly connected to both
the line-in jack and to the
headphone/audio out jack on your
device
Make sure the unit is properly
connected to AC power source.
Check that the Power Button is lit
up, indicating the unit is ON.
To turn off the unit when done
playing audio via the line in jack,
stop or pause play on your audio
device. The unit will power off
automatically in about 3 minutes.
12
M A I N T E N A N C E
• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials
can damage the surface of the unit.
