Quick Start Setup
1
Download and open the
iHome Control
app from the App Store or Google Play.
Plug the SmartPlug into a desired outlet. The LED will start blinking to indicate it
is ready for setup.
Tap
Add Device ...
in the
Devices
tab and follow the on-screen directions to
complete setup.
When prompted, scan or type the Accessory Setup Code
below:
Success!
You should now be able to toggle your SmartPlugs
ON
or
OFF
from the
iHome Control
app or by using Siri®.
Alternative method for iOS
: Go to your device WiFi settings and connect to
“iHome SmartPlug xxxxx”. Configure it to your preferred WiFi network. Then
re-open the iHome app and proceed from Step above.
1
2
3
3
4
5
NOTE: When typing, dashes are not required