background image

IHP.us.com

8

Printed in U.S.A. © 2014 Innovative Hearth Products

P/N  127160-01  Rev. B  04/2017

IHP reserves the right to make changes at any time, without notice, in design, materials, specifi ca-
tions, prices and also to discontinue colors, styles and products. Consult your local distributor 
for fi replace code information.

1508 Elm Hill Pike, Suite 108 • Nashville, TN 37210

TROUBLESHOOTING

If you encounter problems with your fi replace system, the problem 
may be with either the fi replace itself or with the remote. Review the 
fi replace manufacturer’s operation manual to make sure all connec-
tions are properly made. Then check the operation of the remote in the 
following manner:
• 

Make sure all batteries are correctly installed in the transmitter and 
receiver. Also check that the batteries are fully charged.

• 

Check batteries in transmitter to make sure contacts are touching 
(+) and (-) ends of battery. Bend metal contacts in for tighter fi t.

• 

Be sure receiver and transmitter is within 20 to 25-foot operating 
range.

• 

Keep receiver from temperatures exceeding 130º F. Battery life will 
be shortened if exposed to high temperatures.

• 

If receiver is installed in a tightly enclosed metal surrounding, the 
operating distance will be shortened.

• 

Make sure the hand-held transmitter and remote receiver are com-
municating properly (see LEARNING TRANSMITTER TO RECEIVER 
section).

FCC REQUIREMENTS

NOTE:

 

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO 

OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS 
TO THE EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S  
AUTHORITY TO OPERATE THE EQUIPMENT.

TECHNICAL SERVICE

You may have further questions about installation, operation, or 
troubleshooting. Please contact your IHP dealer for any questions or 
concerns. When contacting your dealer please have your model and 
serial numbers of your appliance ready. You can also visit our web site 
at IHP.us.com.

f i r e - p a r t s . c o m

Summary of Contents for TSRC









Reviews: